- Lightweight: 45%-60% lighter than traditional shutters.
- No Water Intrusion: No mechanical ties or special waterproofing is required.
- Climate Friendly: Impervious to the effects of moisture and the elements.
- Less Maintenance: No warping, splitting, delaminating or rusting.
- Waterproof: Non-porous finish – will not absorb moisture or mildew.
- Standard Sizing: All shutters available in an array of popular sizes.
- Custom Creations: Our CAD technology allows for ultimate design flexibility.
- Key Lock Shadow Advantage: Shutters are integrated with a ½” adhesive key which provides a strong bond and creates a shadow line.
- 10-Year Warranty: On all structural components.

Technical
Features
Installation Info
- Locate shutters near installation area.

- Lay shutter flat and begin to apply adhesive.

- Apply foam adhesive in between each keyway.

- Press shutter into place

- Remove shutter from wall and allow adhesive to get tacky. (Approximately 3-5 minutes)

- When adhesive is tacky to the touch, press the shutter into place and hold in the desired
location for 3-5 minutes.

Hardcoat Systems
The Stryrothane Hardcoat System starts with a 2lb high density EPS foam core. Then the hardcoat and primer are applied and finished with a synthetic texture.
This illustration shows the makeup of a complete styrothane hardcoat system, one of the most durable & dependable systems in the industry. This multi-layered, composite system comes together to give your shutter unparalleled protection and beauty.
Technical Data
Styrothane 5321FR
A fast curing, 100% solids, aromatic urethane coating. Specifically designed as a hard coat to
proved high impact damage resistance for expanded polystyrene (EPS), Styrofoam and PUF. Click
here to download specification sheet (.pdf)
| Property | Units | ASTM Test |
|---|---|---|
| Density | ASTM D1353 | 100% |
| Thermal Conductivity @ 40° F | ASTM D497 | 30° F to 180°F |
| (k Factor) @ 75° F | ASTM D638 | 3350 PSI |
| Thermal Resistance @ 40° F | ASTM D638 | 8.00% |
| (R Value) @ 75° F | ASTM 790 | 6600 |
| Strength Properties | ||
| Gardner Impact | ASTM D3029 - 77F | 120 in/lb |
| Heat Deflection @ 66psi | ASTM D648 | 85° F |
| Comprehensive Strength @10% DEFL | ASTM D695 | 4500psi |
| UV Resistance | Protect with an approved coating | |
| Surface Burning Characteristic | ASTM E84-9a | |
| Smoke Index | 450 |